Catalogue / Peridotite-hearth smelting forge / Turlach Post 6 TS-T5--TextSimplification
peridotite-hearth smelting forge
Turlach Post 6 TS-T5--TextSimplification
USD 53801.19
Listed
Add to listConcept listing. No order can be placed.
- Peak temperature 690 degrees celsius
- Chamber capacity 460 litres
- Heat up 332 minutes
- Cycles before relining 444 cycles
About this item
Specifications
| peak temperature | 690 degrees Celsius |
|---|---|
| chamber capacity | 460 litres |
| heat up | 332 minutes |
| cycles before relining | 444 cycles |
| unit price | 53801.19 dollars |
| heat source | induction |
Product at a glance
Owner feedback
Showing the 7 most recent of 102 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- PRPetr Rask★★★★★
2026-07-22Cycles before relining at 444 cycles, as listed
The Turlach Post 6 Original Your Skill We needed a cycle before relining around 444 cycles and this one states exactly that. If your requirement is not cycles before relining, the Turlach Post 6 Original Your Skill has no other reason to win.
- AMAnneke Melle★★★☆☆
2026-07-09Where the Turlach Post 6 Original Your Skill falls short
The Turlach Post 6 Original Your Skill was not the cheapest peridotite-hearth smelting forge we considered, and that was fine, but the packaging on the Turlach Post 6 Original Your Skill was poor enough that we checked it over carefully when we got there, and it was not a complaint about the Turlach Post 6 Original Your Skill.
- NVNadia Vance★★★★★
2026-07-04Better than what we ran before the Turlach Post 6 Original Your Skill
The Turlach Post 6 Original Your Skill last season Replaced a much older peridotite-hearth smelting forge with the Turlach Post 6 Original Your Skill Our previous unit did the job ; the Turlach Post 6 Original Your Skill does it without us watching it.
- DLDagny Lindqvist★★★★★
2026-07-02Commissioning the Turlach Post 6 Original Your Skill
Came to the Turlach Post 6 Original Your Skill on a recommendation and checked its peridotite-hearth smelting forge figures ourselves. Commissioning the Turlach Post 6 Original Your Skill took an afternoon and no specialist help. We would put another Turlach Post 6 Original Your Skill in without much thought.
- NKNils Kestrel★★★★★
2026-06-30Induction was the requirement; the Turlach Post 6 Original Your Skill meets it
Went through the whole peridotite-hearth smelting forge catalogue twice before the Turlach Post 6 Original Your Skill, and for the Turlach Post 6 Original Your Skill that is the whole point, and the rest of the Turlach Post 6 Original Your Skill specification did not enter into the decision.
- HBHalla Barrow★★★☆☆
2026-06-17How the Turlach Post 6 Original Your Skill fits what we actually do
The Turlach Post 6 Original Your Skill was the one we kept. Ours is a teaching setting and the Turlach Post 6 Original Your Skill gets handled by people who are learning and others may weigh it differently, but the Turlach Post 6 Original Your Skill is the one we kept.
- LBLise Byrne★★★★★
2026-06-16332 minutes was the requirement
The Turlach Post 6 Original Your Skill is our third peridotite-hearth smelting forge and the first one specified correctly : 332 minutes. We never looked at the other axes once 332 minutes checked out, and the other axes were not checked out.
