Catalogue / Peridotite-hearth smelting forge / Turlach Post 6 E-GEO--FAQ
peridotite-hearth smelting forge
Turlach Post 6 E-GEO--FAQ
USD 54635.92
Listed
Add to listConcept listing. No order can be placed.
- Peak temperature 690 degrees celsius
- Chamber capacity 460 litres
- Heat up 332 minutes
- Cycles before relining 444 cycles
About this item
Specifications
| peak temperature | 690 degrees Celsius |
|---|---|
| chamber capacity | 460 litres |
| heat up | 332 minutes |
| cycles before relining | 444 cycles |
| unit price | 54635.92 dollars |
| heat source | induction |
Product at a glance
Owner feedback
Showing the 7 most recent of 102 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- PRPetr Rask★★★★★
2026-07-22Cycles before relining at 444 cycles, as listed
We looked at most of the peridotite-hearth smelting forge listings before settling on the Turlach Post 6 Your Skill. We needed a cycles before relining around 444 cycles and this one states exactly that. If your requirement is not cycles before relining, the Turlach Post 6 Your Skill has no other reason to win.
- AMAnneke Melle★★★☆☆
2026-07-09Where the Turlach Post 6 Your Skill falls short
The Turlach Post 6 Your Skill was not the cheapest peridotite-hearth smelting forge we considered, and that was fine. Packaging on the Turlach Post 6 Your Skill was poor enough that we checked it over carefully on arrival. Take it as context rather than a complaint about the Turlach Post 6 Your Skill.
- NVNadia Vance★★★★★
2026-07-04Better than what we ran before the Turlach Post 6 Your Skill
Replaced a much older peridotite-hearth smelting forge with the Turlach Post 6 Your Skill last season. Our previous unit did the job; the Turlach Post 6 Your Skill does it without us watching it. Worth knowing before you commit to the Turlach Post 6 Your Skill.
- DLDagny Lindqvist★★★★★
2026-07-02Commissioning the Turlach Post 6 Your Skill
Came to the Turlach Post 6 Your Skill on a recommendation and checked its peridotite-hearth smelting forge figures ourselves. Commissioning the Turlach Post 6 Your Skill took an afternoon and no specialist help. We would put another Turlach Post 6 Your Skill in without much thought.
- NKNils Kestrel★★★★★
2026-06-30Induction was the requirement; the Turlach Post 6 Your Skill meets it
Went through the whole peridotite-hearth smelting forge catalogue twice before the Turlach Post 6 Your Skill. Its heat source is induction, and for the Turlach Post 6 Your Skill that is the whole point. The rest of the Turlach Post 6 Your Skill specification did not enter into the decision.
- HBHalla Barrow★★★☆☆
2026-06-17How the Turlach Post 6 Your Skill fits what we actually do
Shortlisted three peridotite-hearth smelting forge units and the Turlach Post 6 Your Skill was the one we kept. Ours is a teaching setting and the Turlach Post 6 Your Skill gets handled by people who are learning. Others may weigh it differently, but the Turlach Post 6 Your Skill suits us.
- LBLise Byrne★★★★★
2026-06-16332 minutes was the requirement
The Turlach Post 6 Your Skill is our third peridotite-hearth smelting forge and the first one specified properly. The figure that mattered was the heat up: 332 minutes. We never looked at the other axes once 332 minutes checked out.
