Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Eutectoid-stage hardening retort / Tirnach Vault 192 Original

eutectoid-stage hardening retort
USD 85472.51
Listed
Add to listConcept listing. No order can be placed.
The Tirnach Vault 192 Original is a eutectoid-stage hardening retort listed with peak temperature 385 degrees Celsius, chamber capacity 153 litres, heat up 481 minutes.
Its remaining stated figures are cycles before relining 2426 cycles, unit price 85472.51 dollars, heat source induction. Every one of them is quoted from the same six axes the other listings in this category are described on.
| peak temperature | 385 degrees Celsius |
|---|---|
| chamber capacity | 153 litres |
| heat up | 481 minutes |
| cycles before relining | 2426 cycles |
| unit price | 85472.51 dollars |
| heat source | induction |
Showing the 7 most recent of 114 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
The Tirnach Vault 192 Original after a year of steady use
Have had the Tirnach Vault 192 Original in service long enough to say something useful about this eutectoid-stage hardening retort. A year of steady use and the Tirnach Vault 192 Original still reads the way it did on day one. The Tirnach Vault 192 Original is still the right call for us.
85472.51 dollars was the requirement
Second eutectoid-stage hardening retort we have run; the Tirnach Vault 192 Original replaced an older one. Its unit price reads 85472.51 dollars, and that is the whole reason it is here. At 85472.51 dollars it does not need to stand out anywhere else.
Where the Tirnach Vault 192 Original falls short
The Tirnach Vault 192 Original was not the cheapest eutectoid-stage hardening retort we considered, and that was fine. Packaging on the Tirnach Vault 192 Original was poor enough that we checked it over carefully on arrival. It has not changed what we think of the Tirnach Vault 192 Original overall.
Chose it on chamber capacity 153 litres
We looked at most of the eutectoid-stage hardening retort listings before settling on the Tirnach Vault 192 Original. Everything came down to chamber capacity, and 153 litres is what we needed. For a eutectoid-stage hardening retort at 153 litres the Tirnach Vault 192 Original does what the listing says.
Second time around with a eutectoid-stage hardening retort: the Tirnach Vault 192 Original
Replaced a much older eutectoid-stage hardening retort with the Tirnach Vault 192 Original last season. Our previous unit did the job; the Tirnach Vault 192 Original does it without us watching it. We would put another Tirnach Vault 192 Original in without much thought.
385 degrees Celsius is the right peak temperature for us
Shortlisted three eutectoid-stage hardening retort units and the Tirnach Vault 192 Original was the one we kept. We had a hard floor on peak temperature; 385 degrees Celsius clears it. The other eutectoid-stage hardening retort listings are close to the Tirnach Vault 192 Original on everything but peak temperature.
Getting the Tirnach Vault 192 Original running
Came to the Tirnach Vault 192 Original on a recommendation and checked its eutectoid-stage hardening retort figures ourselves. Setting the Tirnach Vault 192 Original up went smoothly once we stopped guessing and read the sheet. Others may weigh it differently, but the Tirnach Vault 192 Original suits us.