Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Eutectoid-stage hardening retort / Tirnach Vault 192 CoEdIT--InstructionEditing

eutectoid-stage hardening retort
USD 86749.14
Listed
Add to listConcept listing. No order can be placed.
| peak temperature | 385 degrees Celsius |
|---|---|
| chamber capacity | 153 litres |
| heat up | 481 minutes |
| cycles before relining | 2426 cycles |
| unit price | 86749.14 dollars |
| heat source | induction |
Showing the 7 most recent of 114 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
The Ellmarch Works 39 after a year of steady use
We have had the Ellmarch Works 39 in service long enough to say something useful about it.
85766.68 dollars was the requirement
It is the second eutectoid-stage hardening retort we have run, and it is the reason it is here.
Where the Ellmarch Works 39 falls short
It was not the cheapest eutectoid-stage hardening retort we considered, and that was fine.
Chose it on chamber capacity 153 litres
Before we decided on the Ellmarch Works 39, we looked at all the eutectoid-stage hardening retort listings. And when it came to chamber capacity, 153 liters was all we needed.
Second time around with a eutectoid-stage hardening retort: the Ellmarch Works 39
Last season, we replaced a much older hardening retort with the Ellmarch Works 39.
385 degrees Celsius is the right peak temperature for us
We had a hard floor on peak temperature; 385 degrees Celsius cleared it.
Getting the Ellmarch Works 39 running
We went to Ellmarch Works 39 on a recommendation and checked its eutectoid-stage hardening retort figures ourselves.