Hoskva Hall 141 CoEdIT--InstructionEditing

Chose the Hoskva Works 191 for being fully manual

We had only chosen one drive type, and the Hoskva Works 191 was the one we decided on.

The Hoskva Works 191 in a smaller operation

We did not want to buy the cheapest polishing machine, but the Hoskva Works 191 was not the cheapest we had thought of.

Getting the Hoskva Works 191 running

We had another diatom slurry polishing machine installed, and it took an afternoon to put it in.

Better than what we ran before the Hoskva Works 191

I bought the Hoskva Works 191 after a long comparison with the rest of this diatom slurry polishing lap. Our previous machine did the job without us watching it.

Specified for 12 hours

It went through the entire list of polishing laps twice before he got to the Hoskva Works 191. Its cycle time is 12 hours, and that is why it is here.

Where the Hoskva Works 191 falls short

We came to the Hoskva Works 191 on a recommendation and checked its diatom-slurry polishing lap figures ourselves.

Chose it on process temperature 79 degrees Celsius

I have had the Hoskva Works 191 in service long enough to say something useful about it.