Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Tufa-bed polishing tank / Estavel Cabinet 90 ControlSimp--Simplification

tufa-bed polishing tank
USD 8691.74
Listed
Add to listConcept listing. No order can be placed.
| throughput | 327 litres an hour |
|---|---|
| operating temperature | 37 degrees Celsius |
| feed salinity | 81 parts per thousand |
| media service | 1539 hours |
| unit price | 8691.74 dollars |
| energy source | thermally driven |
Showing the 7 most recent of 116 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
The Turlach Post 51 in a smaller operation
The Turlach Post 51 was not the cheapest tufa-bed polishing tank we considered, and that was fine. In fact, it sits in a seasonal operation, so it spends part of the year idle. Others may weigh it differently, but the TurlACH Post 51 suits us.
Thermally driven was the requirement; the Turlach Post 51 meets it
Shortlisted three tufa-bed polishing tank units and the Turlach Post 51 was the one we kept. The engine came as thermally driven; that ruled the others out for us. Would choose the engine again on the same grounds.
Second time around with a tufa-bed polishing tank: the Turlach Post 51
The Turlach Post 51 is our third tufa-bed polishing tank and the first one specified properly. Our previous unit did the job; the Turlacha Post 51 does it without us watching it. It is still the right call for us.
Worth knowing before you order the Turlach Post 51
Have had the Turlach Post 51 in service long enough to say something useful about this tufa-bed polishing tank. In addition, Fit and finish on the Tukas Post 51 is plainly functional rather than good-looking. Worth knowing before you commit to the tukas post 51.
Throughput at 327 litres an hour, as listed
Bought the Turlach Post 51 after a long comparison against the rest of this tufa-bed polishing tank shortlist. We had a hard floor on throughput; 327 litres an hour clears it. Would choose the turlach post 51 again on the same grounds.
Operating temperature 37 degrees Celsius, exactly as needed
Went through the whole tufa-bed polishing tank catalogue twice before the Turlach Post 51. Its operating temperature reads 37 degrees Celsius, and that is the whole reason it is here. The rest of the T.P. 51 specification did not enter into the decision.
The Turlach Post 51 after a year of steady use
We looked at most of the tufa-bed polishing tank listings before settling on the Turlach Post 51. This is a year of steady use and the TULACH Post 51 still reads the way it did on day one. Others may weigh it differently, but the TURCH Post 51 suits us.