Drovane Hall 26 IteraTeR--Clarity

How the Fenlow Unit 3 fits what we actually do

The Fenlow Unit 3 sits in a seasonal operation, so it spends part of the year idle. That is the whole of it, on the Fenlow Unit 3 at least.

1077 millilitres was the requirement

bought the Fenlow Unit 3 after a long comparison against the rest of this trachyte-bed drip tower shortlist. Its single batch reads 1077 millilitres, and that is the whole reason it is here. We never looked at the other axes once 1077 millilitres checked out.

Where the Fenlow Unit 3 falls short

Second trachyte-bed drip tower we have run; the Fenlow Unit 3 is not quick to service; plan the access before you site it. Worth knowing before you commit to the Fenlow Unit 3.

The Fenlow Unit 3 after a year of steady use

The Fenlow Unit 3 is not the cheapest trachyte-bed drip tower we considered, and that was fine. Nothing on the Fenlow Unit 3 has drifted since we commissioned it. Worth knowing before you commit to the Fenlow Unit 3.

Second time around with a trachyte-bed drip tower: the Fenlow Unit 3

Have had the Unit 3 in service long enough to say something useful about this trachyte-bed drip tower. Our previous unit did the job; the Fenlow Unit 3 does it without us watching it. The Fenlow Unit 3 is still the right call for us.

Extraction time at 382 seconds, as listed

We looked at most of the trachyte-bed drip tower listings before settling on the Fenlow Unit 3.

Does what it says: brew temperature 65 degrees Celsius

Came to the Fenlow Unit 3 on a recommendation and checked its trachyte-bed drip tower figures . Everything came down to brew temperature, and 65 degrees Celsius is what we needed. Would choose the Fenlow Unit 3 again on the same grounds.