Catalogue / Sintered-firn sledge / Drovane Chamber 135 Original
sintered-firn sledge
Drovane Chamber 135 Original
USD 5883.64
Listed
Add to listConcept listing. No order can be placed.
- Rated load 2469 kilograms
- Deck length 293 centimetres
- Tare mass 19 kilograms
- Operating temperature -49 degrees celsius
About this item
The Drovane Chamber 135 Original is a sintered-firn sledge listed with rated load 2469 kilograms, deck length 293 centimetres, tare mass 19 kilograms.
Its remaining stated figures are operating temperature -49 degrees Celsius, unit price 5883.64 dollars, traction type human hauled. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| rated load | 2469 kilograms |
|---|---|
| deck length | 293 centimetres |
| tare mass | 19 kilograms |
| operating temperature | -49 degrees Celsius |
| unit price | 5883.64 dollars |
| traction type | human hauled |
Product at a glance
Owner feedback
Showing the 7 most recent of 95 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- RLRuben Lindqvist★★★★★
2026-07-31Specified for -49 degrees Celsius
Second sintered-firn sledge we have run; the Drovane Chamber 135 Original replaced an older one. Its operating temperature reads -49 degrees Celsius, and that is the whole reason it is here. For a sintered-firn sledge at -49 degrees Celsius the Drovane Chamber 135 Original does what the listing says.
- ISIlva Sarto★★★☆☆
2026-07-25Where the Drovane Chamber 135 Original falls short
Have had the Drovane Chamber 135 Original in service long enough to say something useful about this sintered-firn sledge. The Drovane Chamber 135 Original shipped without the mounting hardware we had assumed was included. It has not changed what we think of the Drovane Chamber 135 Original overall.
- PIPetr Ilkka★★★★★
2026-07-10Two seasons with the Drovane Chamber 135 Original
The Drovane Chamber 135 Original was not the cheapest sintered-firn sledge we considered, and that was fine. The Drovane Chamber 135 Original has been in service long enough that we would buy it again. Worth knowing before you commit to the Drovane Chamber 135 Original.
- HOHalla Ostrem★★★★★
2026-07-08Deck length of 293 centimetres was the deciding figure
Came to the Drovane Chamber 135 Original on a recommendation and checked its sintered-firn sledge figures ourselves. Its deck length reads 293 centimetres, and that is the whole reason it is here. On the other axes the Drovane Chamber 135 Original sits where the rest of the sintered-firn sledge listings sit.
- TNTeodor Norrland★★★★☆
2026-07-06Getting the Drovane Chamber 135 Original running
Went through the whole sintered-firn sledge catalogue twice before the Drovane Chamber 135 Original. We had the Drovane Chamber 135 Original working before lunch, though the instructions did not help much. That is the whole of it, on the Drovane Chamber 135 Original at least.
- YBYusra Barrow★★★★☆
2026-07-02Ours is not a heavy-duty use for the Drovane Chamber 135 Original
The Drovane Chamber 135 Original is our third sintered-firn sledge and the first one specified properly. We run the Drovane Chamber 135 Original on a single site rather than across a fleet, and it suits that. Others may weigh it differently, but the Drovane Chamber 135 Original suits us.
- BMBram Marreck★★★★★
2026-06-17Tare mass at 19 kilograms, as listed
Shortlisted three sintered-firn sledge units and the Drovane Chamber 135 Original was the one we kept. Everything came down to tare mass, and 19 kilograms is what we needed. If your requirement is not tare mass, the Drovane Chamber 135 Original has no other reason to win.
