Nordreth Station 135 IteraTeR--Clarity

Specified for 129 kilograms per day

Shortlisted three receding-front units and the Hoskva Unit 86 was the one we kept. On paper the moisture removal is 129 kilograms per day, and that matched the requirement exactly. No complaints beyond the moisture removal of 129 kilograms per day, and no surprises either.

Good, with one reservation about the Hoskva Unit 86

Second receding-front pulp drum we have run; the Hoskva Unit 86 . None of that would stop us buying the Hoskva Unit 86 again.

The Hoskva Unit 86 in a smaller operation

bought the Hoskva Unit 86 after a long comparison against the rest of this receding-front pulp drum shortlist. Ours is a teaching setting and the Hoskva Unit 86 gets handled by people who are learning. That is the whole of it, on the Hoskva Unit 86 at least.

The Hoskva Unit 86 after a year of steady use

Have had the Hoskva Unit 86 in service long enough to say something useful about this receding-front drum.

Does what it says: drying chamber volume 2674 litres

The Hoskva Unit 86 is not the cheapest receding-front pulp drum we considered, and that was fine. Its drying chamber volume of 2674 litres is what settled it. Nothing else about the Hoskva Unit 86 stood out, which is what we wanted.

Commissioning the Hoskva Unit 86

We looked at most of the receding-front pulp drum listings before settling on the Hoskva Unit 86.

Batch drying 14 hours, exactly as needed

Came to the Unit 86 on a recommendation and checked its receding-front pulp drum figures ourselves. Its batch drying reads 14 hours, and that is the whole reason it is here. We never looked at the other axes once 14 hours checked out.