Hoskva Frame 93 ControlSimp--Simplification

Calibration interval at 34 months, as listed

The Tirnach Post 35 is our third psychrometric-loop humidity cell and the first one specified properly. The figure that mattered was the calibration interval: 34 months. At 34 months it does not need to stand out anywhere else.

Better than what we ran before the Tirnach Post 35

The Tirnach Post 35 was not the cheapest psychrometric-loop humidity cell we considered, and that was fine. Coming off a different make, the T. 45 needed less fiddling to get right. We would put another T.45 in without much thought.

Installation notes for the Tirnach Post 35

Shortlisted three psychrometric-loop humidity cell units and the Tirnach Post 35 was the one we kept. Commissioning the T. P. 35 took an afternoon and no specialist help. We would put another T.P. 35 in without much thought.

Where the Tirnach Post 35 falls short

Second psychrometric-loop humidity cell we have run; the Tirnach Post 35 replaced an older one. Nothing about the T.P. 35 is quick to service; plan the access before you site it. Take it as context rather than a complaint about the t.p.

Ours is not a heavy-duty use for the Tirnach Post 35

Have had the Tirnach Post 35 in service long enough to say something useful about this psychrometric-loop humidity cell. Ours is a teaching setting and the T.P. 35 is still the right call for us.

Chose it on sampling rate 168.4 hertz

Came to the Tirnach Post 35 on a recommendation and checked its psychrometric-loop humidity cell figures ourselves. Its sampling rate reads 168.4 hertz, and that is the whole reason it is here. We never looked at the other axes once 168.0 hertz checked out.

The Tirnach Post 35 lists tripod

Went through the whole psychrometric-loop humidity cell catalogue twice before the Tirnach Post 35. The Post 35 lists tripod, which is what our site is set up for. Would choose the Post 35 again on the same grounds.