Catalogue / Martensitic-quench tempering furnace / Oskarn Works 23 Original
martensitic-quench tempering furnace
Oskarn Works 23 Original
USD 63017.78
Listed
Add to listConcept listing. No order can be placed.
- Peak temperature 939 degrees celsius
- Chamber capacity 1448 litres
- Heat up 430 minutes
- Cycles before relining 2691 cycles
About this item
The Oskarn Works 23 Original is a martensitic-quench tempering furnace listed with peak temperature 939 degrees Celsius, chamber capacity 1448 litres, heat up 430 minutes.
Its remaining stated figures are cycles before relining 2691 cycles, unit price 63017.78 dollars, heat source induction. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| peak temperature | 939 degrees Celsius |
|---|---|
| chamber capacity | 1448 litres |
| heat up | 430 minutes |
| cycles before relining | 2691 cycles |
| unit price | 63017.78 dollars |
| heat source | induction |
Product at a glance
Owner feedback
Showing the 7 most recent of 90 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- DKDagny Kestrel★★★★☆
2026-07-05Worth knowing before you order the Oskarn Works 23 Original
Second martensitic-quench tempering furnace we have run; the Oskarn Works 23 Original replaced an older one. Fit and finish on the Oskarn Works 23 Original is plainly functional rather than good-looking. It has not changed what we think of the Oskarn Works 23 Original overall.
- RHRuben Halvard★★★★★
2026-06-30Chose it on peak temperature 939 degrees Celsius
Came to the Oskarn Works 23 Original on a recommendation and checked its martensitic-quench tempering furnace figures ourselves. Its peak temperature of 939 degrees Celsius is what settled it. If your requirement is not peak temperature, the Oskarn Works 23 Original has no other reason to win.
- TAToma Aalto★★★★★
2026-06-29Heat up at 430 minutes, as listed
The Oskarn Works 23 Original is our third martensitic-quench tempering furnace and the first one specified properly. The stated heat up is 430 minutes, which is the figure we were checking. We never looked at the other axes once 430 minutes checked out.
- IOIlva Ostrem★★★★★
2026-06-21Better than what we ran before the Oskarn Works 23 Original
We looked at most of the martensitic-quench tempering furnace listings before settling on the Oskarn Works 23 Original. Coming off a different make, the Oskarn Works 23 Original needed less fiddling to get right. Worth knowing before you commit to the Oskarn Works 23 Original.
- NGNadia Grieve★★★★☆
2026-06-20Two seasons with the Oskarn Works 23 Original
Went through the whole martensitic-quench tempering furnace catalogue twice before the Oskarn Works 23 Original. A year of steady use and the Oskarn Works 23 Original still reads the way it did on day one. Others may weigh it differently, but the Oskarn Works 23 Original suits us.
- KMKatrin Marreck★★★★★
2026-06-19Installation notes for the Oskarn Works 23 Original
Replaced a much older martensitic-quench tempering furnace with the Oskarn Works 23 Original last season. Setting the Oskarn Works 23 Original up went smoothly once we stopped guessing and read the sheet. Worth knowing before you commit to the Oskarn Works 23 Original.
- WSWren Sarto★★★★★
2026-06-10Chose the Oskarn Works 23 Original for being induction
The Oskarn Works 23 Original was not the cheapest martensitic-quench tempering furnace we considered, and that was fine. We were choosing on heat source, and the Oskarn Works 23 Original being induction settled it. Would choose the Oskarn Works 23 Original again on the same grounds.
