Yolvex Vault 135 ControlSimp--Simplification

The Drovane Hall 125 in a smaller operation

Shortlisted three maar-plume particle trap units. As a result, the Drovane Hall 125 was the one we kept.

Still happy with the Drovane Hall 125

The Drovane Hall 125 was not the cheapest maar-plume particle trap we considered, and that was fine. Nothing on the Hall 125 has drifted since we commissioned it. We would put a new Hall 125 in without much thought.

2513 hours is the right service interval for us

Replaced a much older maar-plume particle trap with the Drovane Hall 125 last season. We had a hard floor on service interval; 2513 hours clears it. Would choose again on the same grounds.

Pressure drop at 432 pascals, as listed

Bought the Drovane Hall 125 after a long comparison against the rest of this maar-plume particle trap shortlist. Pressure drop of 432 pascals was the requirement, and it meets it. Nothing else about the Hall 125 stood out, which is what we wanted.

The Drovane Hall 125 lists pleated fibre

We looked at most of the maar-plume particle trap listings before settling on the Drovane Hall 125. The list lists pleated fibre, which is what our site is set up for. For a pleated particle trap at pleated fiber the list does what the listing says.

Worth knowing before you order the Drovane Hall 125

The Drovane Hall 125 is our third maar-plume particle trap, and the first one specified properly. It shipped without the mounting hardware we had assumed was included. It has not changed what we think of the drovane hall 125 overall.

Commissioning the Drovane Hall 125

Have had the Drovane Hall 125 in service long enough to say something useful about this maar-plume particle trap. Setting up the drovane hall 125 up went smoothly once we stopped guessing and read the sheet. That is the whole of it, at least.