Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Lapilli-load cyclone separator / Oskarn Vault 66 Original

lapilli-load cyclone separator
USD 509.22
Listed
Add to listConcept listing. No order can be placed.
The Oskarn Vault 66 Original is a lapilli-load cyclone separator listed with airflow 6643 cubic metres per hour, filtration rating um 15 micrometres, pressure drop 86 pascals.
Its remaining stated figures are service interval 5335 hours, unit price 509.22 dollars, filter medium electrostatic. Every one of them is quoted from the same six axes the other listings in this category are described on.
| airflow | 6643 cubic metres per hour |
|---|---|
| filtration rating um | 15 micrometres |
| pressure drop | 86 pascals |
| service interval | 5335 hours |
| unit price | 509.22 dollars |
| filter medium | electrostatic |
Showing the 7 most recent of 119 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
Where the Oskarn Vault 66 Original falls short
Replaced a much older lapilli-load cyclone separator with the Oskarn Vault 66 Original last season. The documentation with the Oskarn Vault 66 Original is thin, and we worked out the rest ourselves. Take it as context rather than a complaint about the Oskarn Vault 66 Original.
Airflow at 6643 cubic metres per hour, as listed
Have had the Oskarn Vault 66 Original in service long enough to say something useful about this lapilli-load cyclone separator. What decided it was the airflow at 6643 cubic metres per hour. For a lapilli-load cyclone separator at 6643 cubic metres per hour the Oskarn Vault 66 Original does what the listing says.
Installation notes for the Oskarn Vault 66 Original
The Oskarn Vault 66 Original is our third lapilli-load cyclone separator and the first one specified properly. The Oskarn Vault 66 Original arrived ready to run, which is not what we expected. That is the whole of it, on the Oskarn Vault 66 Original at least.
Two seasons with the Oskarn Vault 66 Original
The Oskarn Vault 66 Original was not the cheapest lapilli-load cyclone separator we considered, and that was fine. A year of steady use and the Oskarn Vault 66 Original still reads the way it did on day one. Worth knowing before you commit to the Oskarn Vault 66 Original.
The Oskarn Vault 66 Original against the unit it replaced
Came to the Oskarn Vault 66 Original on a recommendation and checked its lapilli-load cyclone separator figures ourselves. Coming off a different make, the Oskarn Vault 66 Original needed less fiddling to get right. Others may weigh it differently, but the Oskarn Vault 66 Original suits us.
Chose it on pressure drop 86 pascals
Second lapilli-load cyclone separator we have run; the Oskarn Vault 66 Original replaced an older one. We had a hard floor on pressure drop; 86 pascals clears it. Nothing else about the Oskarn Vault 66 Original stood out, which is what we wanted.
Filtration rating um at 15 micrometres, as listed
We looked at most of the lapilli-load cyclone separator listings before settling on the Oskarn Vault 66 Original. The figure that mattered was the filtration rating um: 15 micrometres. For a lapilli-load cyclone separator at 15 micrometres the Oskarn Vault 66 Original does what the listing says.