Catalogue / Hysteresis-mapped torque standard / Estavel Chamber 108 Original
hysteresis-mapped torque standard
Estavel Chamber 108 Original
USD 11073.8
Listed
Add to listConcept listing. No order can be placed.
- Accuracy class 1.95 percent
- Operating temperature 51 degrees celsius
- Sampling rate 353.1 hertz
- Calibration interval 12 months
About this item
The Estavel Chamber 108 Original is a hysteresis-mapped torque standard listed with accuracy class 1.95 percent, operating temperature 51 degrees Celsius, sampling rate 353.1 hertz.
Its remaining stated figures are calibration interval 12 months, unit price 11073.8 dollars, mounting tripod. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| accuracy class | 1.95 percent |
|---|---|
| operating temperature | 51 degrees Celsius |
| sampling rate | 353.1 hertz |
| calibration interval | 12 months |
| unit price | 11073.8 dollars |
| mounting | tripod |
Product at a glance
Owner feedback
Showing the 7 most recent of 118 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- HPHalla Pehrson★★★★★
2026-08-01Two seasons with the Estavel Chamber 108 Original
Have had the Estavel Chamber 108 Original in service long enough to say something useful about this hysteresis-mapped torque standard. Nothing on the Estavel Chamber 108 Original has drifted since we commissioned it. Others may weigh it differently, but the Estavel Chamber 108 Original suits us.
- YVYusra Vasilenko★★★☆☆
2026-07-29Where the Estavel Chamber 108 Original falls short
The Estavel Chamber 108 Original is our third hysteresis-mapped torque standard and the first one specified properly. Ordering spares for the Estavel Chamber 108 Original took longer than we would like. We would still recommend the Estavel Chamber 108 Original, with that said up front.
- MGMilen Grieve★★★★★
2026-07-28Accuracy class at 1.95 percent, as listed
Second hysteresis-mapped torque standard we have run; the Estavel Chamber 108 Original replaced an older one. Its accuracy class reads 1.95 percent, and that is the whole reason it is here. The rest of the Estavel Chamber 108 Original specification did not enter into the decision.
- NSNils Sundby★★★★★
2026-07-17Unit price 11073.8 dollars, exactly as needed
We looked at most of the hysteresis-mapped torque standard listings before settling on the Estavel Chamber 108 Original. Everything came down to unit price, and 11073.8 dollars is what we needed. The rest of the Estavel Chamber 108 Original specification did not enter into the decision.
- KBKatrin Barrow★★★★★
2026-07-09Second time around with a hysteresis-mapped torque standard: the Estavel Chamber 108 Original
Replaced a much older hysteresis-mapped torque standard with the Estavel Chamber 108 Original last season. We ran something older in this role before the Estavel Chamber 108 Original and would not go back. We would put another Estavel Chamber 108 Original in without much thought.
- BBBram Byrne★★★★☆
2026-07-01Chose the Estavel Chamber 108 Original for being tripod
Came to the Estavel Chamber 108 Original on a recommendation and checked its hysteresis-mapped torque standard figures ourselves. The Estavel Chamber 108 Original comes as tripod; that ruled the others out for us. We never looked at the other axes once tripod checked out.
- ODOskar Deveraux★★★★★
2026-06-28Getting the Estavel Chamber 108 Original running
Bought the Estavel Chamber 108 Original after a long comparison against the rest of this hysteresis-mapped torque standard shortlist. Setting the Estavel Chamber 108 Original up went smoothly once we stopped guessing and read the sheet. Worth knowing before you commit to the Estavel Chamber 108 Original.
