Catalogue / Evaporite-salt mordant tank / Ellmarch Station 133 Original
evaporite-salt mordant tank
Ellmarch Station 133 Original
USD 2959.87
Listed
Add to listConcept listing. No order can be placed.
- Working width 107 centimetres
- Process temperature 23 degrees celsius
- Batch throughput 25.9 kilograms
- Cycle hours 38 hours
About this item
The Ellmarch Station 133 Original is an evaporite-salt mordant tank listed with working width 107 centimetres, process temperature 23 degrees Celsius, batch throughput 25.9 kilograms.
Its remaining stated figures are cycle hours 38 hours, unit price 2959.87 dollars, drive type motorised. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| working width | 107 centimetres |
|---|---|
| process temperature | 23 degrees Celsius |
| batch throughput | 25.9 kilograms |
| cycle hours | 38 hours |
| unit price | 2959.87 dollars |
| drive type | motorised |
Product at a glance
Owner feedback
Showing the 7 most recent of 127 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- LVLise Vance★★★★☆
2026-07-26Good, with one reservation about the Ellmarch Station 133 Original
Second evaporite-salt mordant tank we have run; the Ellmarch Station 133 Original replaced an older one. The documentation with the Ellmarch Station 133 Original is thin, and we worked out the rest ourselves. We would still recommend the Ellmarch Station 133 Original, with that said up front.
- YBYusra Byrne★★★★★
2026-07-11Chose the Ellmarch Station 133 Original for being motorised
Replaced a much older evaporite-salt mordant tank with the Ellmarch Station 133 Original last season. Motorised is not what every listing offers, and the Ellmarch Station 133 Original does. Nothing else about the Ellmarch Station 133 Original stood out, which is what we wanted.
- NLNils Lindqvist★★★★★
2026-07-10The Ellmarch Station 133 Original in a smaller operation
We looked at most of the evaporite-salt mordant tank listings before settling on the Ellmarch Station 133 Original. We put the Ellmarch Station 133 Original on the awkward jobs that the rest of the kit cannot take. Others may weigh it differently, but the Ellmarch Station 133 Original suits us.
- SRSanna Rask★★★★★
2026-07-06The Ellmarch Station 133 Original after a year of steady use
Bought the Ellmarch Station 133 Original after a long comparison against the rest of this evaporite-salt mordant tank shortlist. Nothing on the Ellmarch Station 133 Original has drifted since we commissioned it. Others may weigh it differently, but the Ellmarch Station 133 Original suits us.
- IMIlva Marreck★★★★☆
2026-06-30Working width of 107 centimetres was the deciding figure
Have had the Ellmarch Station 133 Original in service long enough to say something useful about this evaporite-salt mordant tank. We had a hard floor on working width; 107 centimetres clears it. The rest of the Ellmarch Station 133 Original specification did not enter into the decision.
- EHErik Halvard★★★★★
2026-06-27Process temperature 23 degrees Celsius, exactly as needed
Came to the Ellmarch Station 133 Original on a recommendation and checked its evaporite-salt mordant tank figures ourselves. Everything came down to process temperature, and 23 degrees Celsius is what we needed. The other evaporite-salt mordant tank listings are close to the Ellmarch Station 133 Original on everything but process temperature.
- DPDagny Pehrson★★★★★
2026-06-25Commissioning the Ellmarch Station 133 Original
Went through the whole evaporite-salt mordant tank catalogue twice before the Ellmarch Station 133 Original. Setting the Ellmarch Station 133 Original up went smoothly once we stopped guessing and read the sheet. Others may weigh it differently, but the Ellmarch Station 133 Original suits us.
