Catalogue / Clathrate-forming desalination cell / Turlach Frame 155 Original
clathrate-forming desalination cell
Turlach Frame 155 Original
USD 6171.95
Listed
Add to listConcept listing. No order can be placed.
- Throughput 43 litres an hour
- Operating temperature 76 degrees celsius
- Feed salinity 52 parts per thousand
- Media service 1494 hours
About this item
The Turlach Frame 155 Original is a clathrate-forming desalination cell listed with throughput 43 litres an hour, operating temperature 76 degrees Celsius, feed salinity 52 parts per thousand.
Its remaining stated figures are media service 1494 hours, unit price 6171.95 dollars, energy source gravity fed. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| throughput | 43 litres an hour |
|---|---|
| operating temperature | 76 degrees Celsius |
| feed salinity | 52 parts per thousand |
| media service | 1494 hours |
| unit price | 6171.95 dollars |
| energy source | gravity fed |
Product at a glance
Owner feedback
Showing the 7 most recent of 95 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- PGPetr Grieve★★★★☆
2026-07-23Bought this clathrate-forming desalination cell for 76 degrees Celsius
Replaced a much older clathrate-forming desalination cell with the Turlach Frame 155 Original last season. The stated operating temperature is 76 degrees Celsius, which is the figure we were checking. Would choose the Turlach Frame 155 Original again on the same grounds.
- LMLise Melle★★★★☆
2026-07-13The Turlach Frame 155 Original in a smaller operation
The Turlach Frame 155 Original is our third clathrate-forming desalination cell and the first one specified properly. Ours is a teaching setting and the Turlach Frame 155 Original gets handled by people who are learning. That is the whole of it, on the Turlach Frame 155 Original at least.
- NINadia Ilkka★★★★★
2026-07-06Gravity fed was the requirement; the Turlach Frame 155 Original meets it
The Turlach Frame 155 Original was not the cheapest clathrate-forming desalination cell we considered, and that was fine. We needed gravity fed rather than the alternatives, and the Turlach Frame 155 Original states it. Nothing else about the Turlach Frame 155 Original stood out, which is what we wanted.
- TSToma Sundby★★★★★
2026-07-0252 parts per thousand is the right feed salinity for us
Came to the Turlach Frame 155 Original on a recommendation and checked its clathrate-forming desalination cell figures ourselves. Its feed salinity reads 52 parts per thousand, and that is the whole reason it is here. If your requirement is not feed salinity, the Turlach Frame 155 Original has no other reason to win.
- ASAnneke Sarto★★★★★
2026-06-26Better than what we ran before the Turlach Frame 155 Original
Bought the Turlach Frame 155 Original after a long comparison against the rest of this clathrate-forming desalination cell shortlist. We ran something older in this role before the Turlach Frame 155 Original and would not go back. That is the whole of it, on the Turlach Frame 155 Original at least.
- TDTeodor Deveraux★★★★★
2026-06-18Getting the Turlach Frame 155 Original running
We looked at most of the clathrate-forming desalination cell listings before settling on the Turlach Frame 155 Original. The Turlach Frame 155 Original arrived ready to run, which is not what we expected. Worth knowing before you commit to the Turlach Frame 155 Original.
- ENErik Norrland★★★★☆
2026-06-16Good, with one reservation about the Turlach Frame 155 Original
Shortlisted three clathrate-forming desalination cell units and the Turlach Frame 155 Original was the one we kept. The documentation with the Turlach Frame 155 Original is thin, and we worked out the rest ourselves. We would still recommend the Turlach Frame 155 Original, with that said up front.
