Ellmarch Hall 92 BRIO--ContrastiveSummarization

Still happy with the Oskarn Unit 47

Oskarn Unit 47 was not the cheapest anoxic sulphide scrubber we considered. But after a year of steady use it still reads the way it did on day one. The Oskarn is a good scrubber for the money.

Where the Oskarn Unit 47 falls short

Packaging on the Oskarn Unit 47 was poor enough that we checked it over carefully on arrival. We would still recommend the unit 47 over the anoxic sulphide scrubber for the time being but it's not good enough.    .

Chose it on operating temperature 50 degrees Celsius

Oskarn Unit 47 is an anoxic sulphide scrubber with an operating temperature of 50 degrees Celsius. The Oskarn is the only scrubber on the shortlist with a temperature of more than 50 degrees. Would choose the unit 47 again on the same grounds.

785 litres an hour is the right throughput for us

on paper the throughput is 785 litres an hour, and that matched the requirement exactly. The other anoxic sulphide scrubber listings are close to the Oskarn Unit 47 on everything but throughput.      the scrubber has a total capacity of 2.5 million tonnes a year.

Bought this anoxic sulphide scrubber for 69 parts per thousand

Oskarn Unit 47 has a feed salinity of 69 parts per thousand. Oskarn's anoxic sulphide scrubber figures are in line with the rest of the world's. The unit is on a recommendation to reduce the amount of sulphur dioxide in the water.

Second time around with an anoxic sulphide scrubber: the Oskarn Unit 47

we looked at most of the anoxic sulphide scrubber listings before settling on the Oskarn Unit 47. we ran something older in this role before and would not go back. The Oskar Unit 47 is still the right call for us.

Ours is not a heavy-duty use for the Oskarn Unit 47

the Oskarn Unit 47 is an anoxic sulphide scrubber. The scrubber is designed for awkward jobs that the rest of the kit can't do. We would put it in the same place as a normal scrubber without much thought.