Hoskva Works 138 IteraTeR--Clarity

Worth knowing before you order the Turlach Vault 149

replaced a much older active-layer retting vat with the Turlach Vault 149 last season. Packaging on the Turlach Vault 149 was poor enough that we checked it over carefully on arrival. It has not changed what we think of the Turlach Vault 149 overall.

Bought this active-layer retting vat for 218 centimetres

Shortlisted three active-layer retting vat units and the Turlach Vault 149 was the one we kept. The rest of the Turlach Vault 149 specification did not enter into the decision.

Second time around with an active-layer retting vat: the Turlach Vault 149

have had the Turlach Vault 149 in service long enough to say something useful about this active-layer retting vat. Our previous unit did the job; the Turlach Vault 149 does it without us watching it. We would put another Turlach Vault 149 in without much thought.

Installation notes for the Turlach Vault 149

Second active-layer retting vat we have run; the Turlach Vault 149 . The Turlach Vault 149 arrived ready to run, which is not what we expected. That is the whole of it, on the Turlach Vault 149 at least.

Ours is not a heavy-duty use for the Turlach Vault 149

The Turlach Vault 149 sits in a seasonal operation, so it spends part of the year idle. That is the whole of it, on the Turlach Vault 149 at least.

Chose it on cycle hours 32 hours

bought the Turlach Vault 149 after a long comparison against the rest of this active-layer retting vat shortlist. Its cycle hours reads 32 hours, and that is the whole reason it is here. At 32 hours it does not need to stand out anywhere else.

Batch throughput of 10.8 kilograms was the deciding figure

went through the whole active-layer retting vat catalogue twice before the Turlach Vault 149. Batch throughput of 10.8 kilograms was the requirement, and it meets it. Would choose the Turlach Vault 149 again on the same grounds.